matplotlib默认根据数据系列自动缩放坐标轴范围。pyplot模块中的autoscale函数可以切换是否自动缩放坐标轴范围,xlim()和ylim()函数可手动设置坐标轴范围。
对于pyplot模块控制坐标轴范围是否自动缩放的函数为autoscale。
函数签名为matplotlib.pyplot.autoscale(enable=True, axis='both', tight=None)
参数作用及取值如下:
底层相关函数有:
自动缩放坐标轴范围功能对比。
import matplotlib.pyplot as plt plt.subplot(121) plt.plot([0.5,0.5]) print(plt.gca().get_autoscale_on()) print(plt.gca().get_autoscalex_on()) print(plt.gca().get_autoscaley_on()) plt.subplot(122) plt.plot([0.5,0.5]) plt.autoscale(False) print(plt.gca().get_autoscale_on()) print(plt.gca().get_autoscalex_on()) print(plt.gca().get_autoscaley_on()) plt.show()
输出:
True
True
True
False
False
False
手动设置x坐标轴的范围或获取x坐标轴的范围。
函数签名为matplotlib.pyplot.xlim(*args, **kwargs)。
调用签名有三种:
其中left为x坐标轴左侧极值,right为x坐标轴右侧极值。注意!left可以比right大!
返回值为(left, right),即坐标轴范围元组。
xlim()相当于Axes.get_xlim,xlim(*args, **kwargs)相当于Axes.set_xlim。
演示xlim()的调用方法。
import matplotlib.pyplot as plt plt.figure(figsize=(14, 3)) plt.subplot(141) plt.plot([1, 1]) print(plt.xlim()) plt.subplot(142) plt.plot([1, 1]) plt.xlim(0, 1.5) plt.annotate('plt.xlim(0,1.5)', (0.1, 1.001)) print(plt.xlim()) plt.subplot(143) plt.plot([1, 1]) plt.xlim((0, 1.5)) plt.annotate('plt.xlim((0,1.5))', (0.1, 1.001)) print(plt.xlim()) plt.subplot(144) plt.plot([1, 1]) plt.xlim(left=0, right=1.5) plt.annotate('plt.xlim(left=0,right=1.5)', (0.1, 1.001)) print(plt.xlim()) plt.show()
输出:
(-0.05, 1.05)
(0.0, 1.5)
(0.0, 1.5)
(0.0, 1.5)
手动设置y坐标轴的范围或获取y坐标轴的范围。使用方法与xim()函数相似。
函数签名为matplotlib.pyplot.ylim(*args, **kwargs)。
调用签名有三种:
其中bottom为x坐标轴左侧极值,top为x坐标轴右侧极值。注意!bottom可以比top大!
返回值为(bottom, top),即坐标轴范围元组。
ylim()相当于Axes.get_ylim,ylim(*args, **kwargs)相当于Axes.set_ylim。
演示ylim()的调用方法。
import matplotlib.pyplot as plt plt.figure(figsize=(14, 3)) plt.subplot(141) plt.plot([1, 1]) print(plt.ylim()) plt.subplot(142) plt.plot([1, 1]) plt.ylim(0, 1.5) plt.annotate('plt.ylim(0,1.5)', (0.1, 1.01)) print(plt.ylim(0,1.5)) plt.subplot(143) plt.plot([1, 1]) plt.ylim((0, 1.5)) plt.annotate('plt.ylim((0,1.5))', (0.1, 1.01)) print(plt.ylim()) plt.subplot(144) plt.plot([1, 1]) plt.ylim(bottom=0, top=1.5) plt.annotate('plt.ylim(bottom=0,top=1.5)', (0.1, 1.01)) print(plt.ylim()) plt.show()
输出:
(0.945, 1.0550000000000002)
(0.0, 1.5)
(0.0, 1.5)
(0.0, 1.5)
到此这篇关于matplotlib之pyplot模块坐标轴范围设置(autoscale(),xlim(),ylim())的文章就介绍到这了,更多相关matplotlib 坐标轴范围内容请搜索呐喊教程以前的文章或继续浏览下面的相关文章希望大家以后多多支持呐喊教程!
声明:本文内容来源于网络,版权归原作者所有,内容由互联网用户自发贡献自行上传,本网站不拥有所有权,未作人工编辑处理,也不承担相关法律责任。如果您发现有涉嫌版权的内容,欢迎发送邮件至:notice#nhooo.com(发邮件时,请将#更换为@)进行举报,并提供相关证据,一经查实,本站将立刻删除涉嫌侵权内容。